All essays
The Manifest
October 8, 202610 min read

How to Set a Marketing Budget

You can set a marketing budget as a percentage of revenue in a few minutes. The harder question is whether that amount can bring in the customers you need, at a cost and pace the business can handle.

I would start with the growth target and work backward. Below is a hypothetical example you can follow with your own numbers, including what to do when the budget doesn't fit the cash or capacity available.

TL;DR & Takeaways

  • Calculate how much growth needs to come from new customers before assigning a marketing budget.
  • Use your conversion rates to estimate the opportunities you'll need, then price the work required to create them.
  • Compare scenarios by changing the underlying assumptions, not adding an arbitrary percentage to the budget.
  • Check payment timing and team capacity before committing money, even when the acquisition cost looks attractive.

Start with what the marketing budget needs to cover

Before choosing channels, agree on the planning period and what the revenue target means. Bookings, recognized revenue, and cash collected aren't interchangeable.

An annual contract signed near year-end may contribute little recognized revenue during that year. And until the customer pays, it doesn't help you pay your own bills.

The SBA's guidance on managing finances distinguishes recording a sale from recording payment. It also covers accounts receivable, accounts payable, and available cash, all of which matter when deciding how much marketing the business can afford.

Ask finance how much revenue existing customers are expected to contribute after churn and expansion. Subtract that from the target, then agree on the new-customer contribution expected from marketing, sales, and partners without counting the same customer twice.

Next, separate costs you've already committed to from spending you can still change. Salaries, signed agency agreements, software renewals, and event deposits need to be accounted for even if you change the campaign plan.

Ask finance how much additional cash is available and when. A budget can fit the annual total and still leave you short in a month when payroll and vendor payments arrive before customer collections.

This is an educational example, not a recommendation to spend a particular amount. Your finance lead or a qualified accountant should review your assumptions and cash forecast before you approve a material commitment.

Work out how many customers and opportunities you need

Consider a hypothetical B2B subscription company planning one acquisition cohort across its full sales cycle. None of the numbers below are client results, industry benchmarks, or a forecast for your business.

After accounting for existing customers and other acquisition sources, the company wants marketing to source $480,000 in new annual contract value. At an assumed $24,000 per new customer, it needs 20 new customers.

That target is contracted recurring value, not cash collected or revenue recognized during the campaign. The plan also needs dates for when opportunities are expected to arrive, close, start service, and pay.

Suppose 25% of qualified opportunities become customers. The company needs 80 qualified opportunities, representing $1.92 million in potential annual contract value, to model those 20 wins.

If 40% of relevant inquiries become qualified opportunities, it needs 200 inquiries. That doesn't mean 200 newsletter signups or any 200 form submissions; the inquiry definition has to match the conversion data you're using.

To use this model:

  1. Divide the new contract-value target by contract value per customer to get required customers.
  2. Divide required customers by the qualified-opportunity win rate to get required opportunities.
  3. Divide required opportunities by the inquiry-to-opportunity rate to get required inquiries.

Round each required count up to a whole number before using it in the next step. Agree with sales on what makes an opportunity qualified, such as customer fit, a relevant problem, and an agreed next sales step.

Use conversion rates from comparable sources and customer segments, allowing enough time for the sales cycle to finish. If last quarter's opportunities are still open, neither treating them all as losses nor quietly excluding them gives you a settled win rate.

Also separate existing pipeline from what the new spending must create. You don't want to budget to acquire customers who are already close to buying.

Estimate the cost of creating that pipeline

In the expected scenario, assume $400 in variable marketing cost per qualified opportunity. This covers the program costs used to create opportunities, separate from the fixed costs below.

Expected-scenario cost Amount
Variable marketing: 80 opportunities × $400 $32,000
Fixed acquisition marketing: people, tools, and production $20,000
Total acquisition marketing budget $52,000
Allocated acquisition sales costs $20,000
Combined acquisition budget $72,000

Across 20 customers, the combined budget produces a modeled $3,600 customer acquisition cost, or CAC. Stripe's CAC payback explanation includes marketing, advertising, sales-team, and other direct acquisition costs in the calculation.

Keep the marketing subtotal separate from combined acquisition spending. Sales costs still affect the economics of acquiring a customer, even if they sit in someone else's budget.

Check what's already included before adding costs. If your historical CAC includes salaries and software, multiplying that CAC by required customers and then adding salaries and software again overstates the budget.

Use either a fully loaded CAC model or a fixed-and-variable model like this one, and reconcile the categories with accounting. Retention, expansion, and broader brand work need their own visible budget lines; the acquisition subtotal isn't the whole marketing budget.

The companion guide to SaaS growth metrics goes further into CAC, customer value, and payback if you need to check those definitions before building the plan.

Check how long payback takes and who can do the work

The example assumes $2,000 in monthly revenue per customer at a 75% gross margin. That gives $1,500 in monthly gross profit, so dividing the $3,600 CAC by $1,500 gives a simplified payback estimate of 2.4 months.

That doesn't mean cash returns 2.4 months after you launch the campaign. The calculation assumes a steady contribution once service begins and leaves out churn, collection delays, and the time needed to generate and close opportunities.

Include those delays in a separate cash forecast, along with delivery costs and other operating obligations. If a customer pays annually upfront, some of that cash still has to fund the service you've promised to deliver.

Then ask sales how many additional qualified opportunities it can handle over the planned period. Check onboarding capacity with delivery too, especially if the campaign is likely to produce several new customers at once.

Assume this team can work 90 additional qualified opportunities across the sales cycle. The expected requirement of 80 fits that total, but the timing still matters: 80 arriving together is different from 80 arriving steadily.

Marketing needs enough capacity to create the assets, run the campaigns, and review lead quality. If that requires outside help or a new hire, add the cost and allow for the time needed to bring them in.

Finally, check whether the channel can supply the volume you're modeling. A historical cost per opportunity tells you what happened at the previous spending level, not how many more suitable buyers you can reach at the same price.

Compare conservative, expected, and aggressive scenarios

I would change the assumptions you're least sure of first. A weaker win rate or a higher cost per opportunity can change the funding decision without any change to your revenue target.

These scenarios keep fixed acquisition marketing and allocated sales costs at $20,000 each. Assume finance has set an $80,000 combined acquisition cash limit, subject to checking when payments fall due.

Model input or output Conservative Expected Aggressive
Target new customers 20 20 25
Qualified-opportunity win rate 20% 25% 25%
Inquiry-to-opportunity rate 35% 40% 40%
Required qualified opportunities 100 80 100
Required inquiries, rounded up 286 200 250
Variable cost per opportunity $500 $400 $450
Marketing budget $70,000 $52,000 $65,000
Combined acquisition budget $90,000 $72,000 $85,000
Modeled CAC $4,500 $3,600 $3,400

The conservative case shows what it would take to reach the original target if conversion worsens and opportunities cost more. It exceeds both the cash limit and the team's opportunity capacity, so the company couldn't approve it as written.

The aggressive case aims for $600,000 in new annual contract value. Its modeled CAC is lower because fixed costs spread across more customers, even though each opportunity costs more.

It also needs more cash and sales capacity than the company has. Hiring to increase capacity would change the costs again, so the lower CAC alone isn't a reason to proceed.

Only the expected case fits the stated totals, leaving $8,000 uncommitted. It still needs to be checked against channel availability, retention, payment timing, and delivery capacity.

If the conservative case is plausible, decide how you'll respond before spending. You might lower the target or give the campaign longer to run; keeping the same target with less money requires a specific reason to expect better performance.

To compare your own assumptions, use the marketing budget calculator. Bring your own conservative, expected, and aggressive inputs rather than treating the numbers in this article as defaults for your business.

Decide how much to test before committing the rest

The example company could start with $4,000 of its $32,000 variable allocation. At the assumed $400 cost per opportunity, that models 10 qualified opportunities.

That sample can help you check targeting and lead quality. It is too small to establish a reliable long-run win rate or show how a larger campaign will perform.

Before the test starts, assign the decisions:

  • Marketing tracks spending and pauses when the cap is reached. More spending needs approval.
  • Sales checks that opportunities meet the agreed definition and receive proper follow-up.
  • Finance checks whether revised collections or obligations put the protected cash balance at risk.
  • The budget owner decides whether to release more money after reviewing outcomes and remaining capacity.

Set the review date around the sales cycle, not the day the ads stop. If deals are still open, report their status without treating their potential value as revenue.

Longer-term brand or content work needs a different evaluation period. Give it a stated purpose, an owner, and a spending limit rather than forcing it into a short acquisition test.

Get your inputs together and take action

Start with the new-customer target and the conversion rates behind it. Ask sales whether those rates reflect the customers you're trying to reach now, and ask finance to check the cost categories and cash available.

Put the source and owner beside each assumption in the model. Leave missing evidence marked as unknown instead of filling the gap with an industry average.

Then look at which uncertain input changes the decision most. If a small change in win rate pushes the plan beyond what you can afford, check that rate before spending time debating the channel split.

More from the manifest.

Browse all essays

Ready to grow?

Book a call to discuss your business, industry, and unique opportunities to see how we can help you scale.

Not ready for a call? Reach out directly → hey@makereality.io

Book a discovery call
01Book a time on our calendar that works for you.
02Have a 30 minute call to discuss your business.
03We'll give you some immediate opportunities we see, live on the call that we can carry forward into a project together.